Hi. This worksheet shows how to use an ode solver for evaluating a double integral over the region between two functions.

DoubleIntegralRK.sm (42 KiB) downloaded 117 time(s).
DoubleIntegralRK.pdf (219 KiB) downloaded 123 time(s).

Best regards.
Alvaro.

Thanks Alvaro for your example.

Can the change of variable be put in the procedure definition?

Wrote

Can the change of variable be put in the procedure definition,?

Like this: yes, just opposite plot.

Double Switch [x, L].sm (6 KiB) downloaded 69 time(s).

Hi. This is the double integral using Gauss Legendre quadrature.

GaussLegendreQuadrature.sm (60 KiB) downloaded 80 time(s).
GaussLegendreQuadrature.pdf (160 KiB) downloaded 78 time(s).

Best regards.
Alvaro.

Wrote

...
Can the change of variable be put in the procedure definition?

Yes.

DoubleIntegralSteelCat.sm (47 KiB) downloaded 84 time(s).
DoubleIntegralSteelCat.pdf (105 KiB) downloaded 67 time(s).

Keisan has longer Legendre than 64, but couldn't copy/paste ?
From other source: 63, 64.

Integrate Legendre [ Wr 24 ].sm (28 KiB) downloaded 80 time(s).

Wrote

Keisan has longer Legendre than 64, but couldn't copy/paste ?
From other source: 63, 64.

Integrate Legendre [ Wr 24 ].sm (28 KiB) downloaded 80 time(s).

Hi Jean. Yes, can copy and paste. Do that first into excel, and from there to the small SMathMatrixEditor and finally paste in SMath.

In the attached Laguerre and Legendre coeffs for the Gauss method.

DoubleIntegralJean.sm (25 KiB) downloaded 78 time(s).
DoubleIntegralJean.pdf (45 KiB) downloaded 87 time(s).

Best regards.
Alvaro

Wrote

Hi Jean. Yes, can copy and paste.

Thanks, Amigo !