Using splines to find the Area Under the Curve

In these two worksheet the Area Under the Curve is found for a biomass batch reactor and a pulse

Javier Ochoa , 15.05.2023 20:34:26 +00:00

Introduction to SMath Studio (2022)

Covers some of the basics of SMath Studio

Вячеслав Мезенцев , 09.01.2022 02:14:48 +00:00

Animating r(θ)=sin(a·θ)

Alvaro Diaz Falconi , 19.05.2023 02:56:04 +00:00

Estimating Fricton Factor accurately

A very accurate equation for calculating the friction factor directly, without trial and error

Javier Ochoa , 17.05.2023 19:01:41 +00:00

Optimize thermal perfomance of spiral coils

Under conditions of maximum efficiency under laminar flow the optimum size of the coils is found

Javier Ochoa , 17.05.2023 18:38:45 +00:00

Integration Trapeze

Integration Trapeze

Jean Giraud , 17.05.2023 13:58:03 +00:00

Simpson versus Trapezoidal method used for integration

The Trapezoidal method is compared with the Simpson method, both using Richardson extrapolation

Javier Ochoa , 16.05.2023 10:51:42 +00:00

Bubble point of a mixture of components

Bubble Point calculation with several nonlinear solvers in SMath Studio

Javier Ochoa , 16.05.2023 10:41:44 +00:00

Equilibrium Flash calculations

Equilibrium Flash solved with different nonlinear solvers and SMath Studio

Javier Ochoa , 16.05.2023 11:18:42 +00:00

Thermodynamics calculations example

Estimate the vapor pressure of ethylbenzene at 460 K, using the Harlacher and Brown

Javier Ochoa , 16.05.2023 10:59:12 +00:00

Chemical Reaction order determination

Using a table you can determine the reaction order easily

Javier Ochoa , 15.05.2023 20:08:14 +00:00

Mass flux and orifice meter calculations

This example use units within the equations to calculate the size of an orifice meter in a pipe

Javier Ochoa , 15.05.2023 20:18:03 +00:00

Linear Regression forced through origin

Linear Regression Equations solved with two different approaches.

Javier Ochoa , 15.05.2023 19:34:36 +00:00

Evaluating the thermal dryer capabilities

This Worksheet solves the evaluation of a simple thermal dryer used in process engineering

Javier Ochoa , 15.05.2023 20:25:05 +00:00

Solve f(x,y) Techniques

Solve f(x,y) Techniques

Jean Giraud , 16.04.2023 16:07:10 +00:00

Image Cross Hair

Image Cross Hair

Jean Giraud , 15.05.2023 09:10:58 +00:00

Convex Hull

Convex Hull

Jean Giraud , 15.05.2023 08:53:41 +00:00

Charmap Demo

Charmap Demo

Jean Giraud , 08.05.2023 12:15:42 +00:00

Dispatch X Direction

Dispatch X Direction

Jean Giraud , 08.05.2023 10:48:41 +00:00

Elementary triangle geometry

Alvaro Diaz Falconi , 01.05.2023 22:14:48 +00:00